Description
Please note: Product photography was taken with an SE/30 Equipped with an Amber CRT.
Specs:
- VGA resolutions: 640×480@60hz, 800×600@75hz, 1024×768@54hz (nonstandard)
- B&W, 4, 16, 256, and thousands colors/greys modes are supported.
- Supports System 6 – 8.1, A/UX (tested w/ 3.0), netBSD
- Plug and play, no software required: all functions are configured in Monitors control panel.
- Compatible with SE/30, IIsi, and third party ROMs in 24 bit and 32 bit modes.
- Works with accelerators: tested on Turbo 040, Carrera 040, Interware Booster 30-SE50F, DiimoCache 030, PowerCache 030, Turbo 040.
- Linear LCD Gamma and CRT Gamma are provided for each mode. (Greyscale defaults to CRT; VGA defaults to LCD)
- Greyscale harness uses longer wires for stacking and 18 gauge +5v/+12v wires to reduce voltage drop.
- Recommended to have a recapped logic board, analog board and PSU.
- Maximum of two 30Video cards per system (slot IDs 9, A are available)
- Power consumption: 2 watts combined +5V and +12V.
This is a Kit, the pictured computer is not included. Juicy Crumb does not take responsibility if you accidentally injure yourself or cause damage to your computer during the installation process. If you are at all uncomfortable with the procedures to install this kit, please seek a qualified individual to perform the installation for you. Installation instructions and updates can be found on github, please review before purchase.
Note: Apple designed the SE/30 to install one well-behaved PDS card. However we’ve found that every combination of 2 cards tested worked, though a good quality recapped & adjusted PSU is absolutely essential. Additional cards may work – most combinations of Accelerator + Grayscale + Ethernet were OK – but it can’t be guaranteed that every combination of cards out there will work.
Card has been has been tested with Asante MacCon, Radius FPD, Shiva Etherport, Fallaron TP594, SEthernet/30, Micron Xceed Color 30HR, Interware GrandVimage, Carrera 040, Interware Booster 30-SE50F, DiimoCache 030, Bolle Ethernet Riser and various ROM SIMMs across multiple different SE/30s. At this point no compatibility issues are known.
