Description
The kit includes all you need to replace your aging CRT and analog board with a brand new 640×480 8.4″ LCD panel, including a brand-new 30Video HC PDS card to drive it digitally in full colour! The 30Video HC card features Thousands of colors (16 bit) support and can drive the internal LCD or an external monitor.
- Bolt-in complete LCD assembly and replacement analog board.
- Fully digital 640×480 LCD for maximum crispness.
- B&W, 4, 16, 256, and Thousands of Colors. Maximum Grayscale is limited to 16 grays.
- Resolutions: 640×480 (Mirrored LCD+VGA), External VGA Only: 800×600, 1024×768
- Plug and play, no drivers, tested with Mac OS 6.0.8 – 8.1 and A/UX 3
- Supports accelerators and third party ROM modules.
- Supports slot IDs 9, A for use with other PDS cards.
- Highly recommended to have a recapped logic board and power supply unit.
- SE/30 onboard video will be disabled if LCD is connected: no “ghost” monitors.
- LCD Brightness is adjusted on the back of the LCD panel. There are holes to fit an external brightness control potentiometer, but there is not one fitted due to lack of a suitable currently produced potentiometer.
Kit contents: LCD assembly, 30Video HC card, analog board replacement, mounting hardware and cables.
Installation can be mostly be accomplished with basic hand-tools; the fan wires on the old AB must be either desoldered or cut to transfer the fan to the provided replacement “analog” board. It is necessary to handle high voltage components of your Macintosh while installing. Please take appropriate precautions while working inside your machine!
This is a Kit, the pictured computer is not included. Juicy Crumb does not take responsibility if you accidentally injure yourself or cause damage to your computer during the installation process. If you are at all uncomfortable with the procedures to install this kit, please seek a qualified individual to perform the installation for you. Installation instructions and updates can be found on github, please review before purchase.
