Description

These are replacement second gears that can be used with Omron motors (see gallery photo 3) for MP-F51W and MP-F75W. Set of 3 pcs, Made in Japan.

Note: Cannot be used with SANWA motors (Make sure it is the same as the 3rd pic).

These gears are notorious for breaking as they age, as shown in the photos.  Without this gear floppy disks will not eject.  A few other sellers offer 3d printed solutions which are low resolution and do not have the same tolerances as originals.  

The backlash (the amount of play between gears) is the same as the original (about 0.3 mm with respect to the parent gear), but the gear shape has been redesigned so that the surface load between the gears is evenly applied. Therefore, it is slightly more tapered than the original shape. Because of its high density, it can only be manufactured in this way by a manufacturing method that is particular about high quality. The surface treatment is perfectly mirror-like with no irregularities and is the same as the original. It sets it apart from gears made with inexpensive 3D printing. You can see that there is no burr or twist of the gear itself even if it is enlarged this much, and the edge is also standing firmly.